Clarion DB346MP Basic Operations, Turning on/off the power, Setting the Z-Enhancer, English

English

8. OPERATIONS

Basic Operations	Note:Be sure to read this chapter referring to the front diagrams of
	chapter “2. CONTROLS” on page 3.

CAUTION

Be sure to lower the volume before switch- ing off the unit power or the ignition key. The unit remembers its last volume setting. If you switch the power off with the volume up, when you switch the power back on, the sudden loud volume may hurt your hearing and damage the unit.

Turning on/off the power

Note:

•Be careful about using this unit for a long time without running the engine. If you drain the car’s battery too far, you may not be able to start the engine and this can reduce the service life of the battery.

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone ef- fects stored in memory. Select the one you prefer.

∗The factory default setting is “Z-EHCR OFF”.

Each time you press the [Z-ENCR] button, the tone effect changes in the following order:

“Z-ENHANCER 1” ➜ “Z-ENHANCER 2” ➜ “Z- ENHANCER 3” ➜ “Z-EHCR OFF” ➜ “Z- ENHANCER 1”...

•Z-ENHANCER 1 : bass emphasized

•Z-ENHANCER 2 : treble emphasized

•Z-ENHANCER 3 : bass and treble empha-

sized

• Z-EHCR OFF : no sound effect

1.Press the [FNC] button.

2.The illumination and display on the unit light up. The unit automatically remembers its last operation mode and will automatically switch to display that mode.

3.Press and hold the [FNC] button for 1 sec- ond or longer to turn off the power for the unit.

Audio Mode Adjustments

Press the [A-M] button to select the adjustment mode. The mode switches as follows each time the [A-M] button is pressed:

BASS ➜ TREB ➜ BAL ➜ FAD ➜ Previous mode

∗The display returns to the previous mode 7 sec- onds after the adjustment.

Selecting a mode

1.Press the [FNC] button to change the opera- tion mode.

2.Each time you press the [FNC] button, the operation mode changes in the following or- der:

Radio mode ➜ CD mode ➜ Radio mode...

Note:

•If the CD mode is selected when no disc is in- serted, the display shows “no DISC”.

Adjusting the volume

Turning the [ROTARY] knob clockwise in- creases the volume; turning it counterclockwise decreases the volume.

∗The volume level is from 0 (minimum) to 33 (maximum).

10 DB245