Radio Operations

Recalling a preset station

Instant station recall (ISR)

A total of 24 preset positions (6-FM1, 6-FM2, 6- FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically.

1.Press the [BND] button and select the desired band (FM or AM).

2.Press the corresponding [DIRECT] button to recall the stored station.

∗Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.

Manual memory

1.Select the desired station with seek tuning, manual tuning or preset tuning.

2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

Instant station recall is a special radio preset that instantly accesses a favorite radio station at a touch of a button. The ISR function even operates with the unit in other modes.

●ISR memory

1.Select the station that you wish to store in ISR memory.

2.Press and hold the [ISR] button for 2 seconds or longer.

●Recalling a station with ISR

In any mode, press the [ISR] button to turn on the radio function and tune the selected radio station. “ISR” appears in the display. Press the [ISR] button again to return to the previous mode.

English

Auto store

Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.

1.Press the [BND] button and select the desired band (FM or AM).

2.Press and hold the [ ] button for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.

Preset scan

Preset scan receives the stations stored in preset memory in order. This function is useful when searching for a desired station in memory.

When the [ ] button is pressed, the “SCN” will be indicated with preset memory numbers and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the [ ] button again to cancel the preset scanning mode.

Note:

•Be careful not to press and hold the [ ] button for 2 seconds or longer, otherwise the auto store function is engaged and the unit starts storing stations.

DB456MC 13