Operations Common to Each Mode

English

To change settings

1.Press and hold the [D] button for 1 second or longer to switch to the adjustment selection display.

2.Press the [a] or [d] button to select the “item name”.

“CLOCK <E>” ↔ “MC-REC” ↔ “SCREEN SVR” ↔ “MSG INP<E>” ↔ “AUTO SCROL” ↔ “DIMMER” ↔ “SYS CHK<E>” ↔...

3.Turn the [ROTARY] knob to select the “desired setting value”.

∗ In the case of item names appearing with the

“E” suffix, after the item name, the [ ] button must be pressed to display the setting value.

∗ After completing settings, press the [D] button to return to the previous mode.

●Setting the clock

2-1. Select “CLOCK <E>”.

3-1. Press the [ ] button.

3-2. Press the [a] or [d] button to select the hour or the minute.

3-3. Turn the [ROTARY] knob to set the correct time.

∗The clock is displayed in 12-hour format.

3-4. Press the [ ] button to store the time into memory.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

●Turning the screen saver function onor off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the Operation Status indication area of the display. You can turn on and off this function.

If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “ON”.

2-1. Select “SCREEN SVR”.

3-1. Turn the [ROTARY] knob to select the setting. Each time you turning the [ROTARY] knob, the setting changes in the following order:

SS OFF ➜ SS ON ➜ SS MESSAGE
●Entering MESSAGE INFORMATION

When the use of the message is selected for the screen saver setting, you can change the contents of the message.

∗Up to 30 characters can be entered.

∗The factory default setting is “WELCOME TO CLARION”.

2-1. Select “MSG INP<E>”.

3-1. Press the [ ] button.

3-2. Press the [a] or [d] button to move the cursor.

3-3. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders:

Capital letters ➜ Numbers ➜ Symbols ➜ Capital letters…

3-4. Turn the [ROTARY] knob to select the desired character.

3-5. Repeat step 3-2 to 3-4 to enter up to 30 characters for message.

3-6. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message mode.

*Press and hold the [BND] button for 1 second or longer to cancel the input message. Then

press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.

●Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA TITLE.

∗The factory default setting is “ON”.

2-1. Select “AUTO SCROL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

●ON:

To scroll automatically.

●OFF:

To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer.

●Dimmer control

You can setting the dimmer control “ON” or “OFF”.

∗The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

20 DB456MC