∗Once selected, the preferred display becomes the display default. When a function adjustment such as volume is made, the screen will momentarily switch to that function’s display, then revert back to the preferred display sev- eral seconds after the adjustment.
∗When you have entered a title in a CD, it ap- pears in the sub display. If you have not en- tered a title, “USER TTL” appears in the title display instead. For information on how to enter a title, refer to the subsection “Entering titles” in the “Other Handy Functions”.
∗You can adjust the way of scrolling a title. For the details on it, refer to the subsection “Adjusting the way of scrolling” in the “Other Handy Functions”.
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects stored in memory. Select the one you prefer.
∗The factory default setting is “OFF”.
Each time you press Z-EHCR button 2, the tone effect changes in the following order:
“Z-EHCR 1” ➜ “Z-EHCR 2” ➜ “Z-EHCR 3” ➜
“OFF” ➜ “Z-EHCR 1”...
•Z-EHCR 1 : bass emphasized
•Z-EHCR 2 : treble emphasized
•Z-EHCR 3 : bass and treble emphasized
Adjusting the tone
Press A-M button ( and select the item to ad- just. Each time you press A-M button (, the item changes in the following order:
●When the Z-enhancer is off
“BASS” ➜ “TREB” ➜ “BAL” ➜ “FAD” ➜
Function mode...
●When Z-enhancer 1, 2 or 3 is set
“Z-EHCR” ➜ “BAL” ➜ “FAD” ➜ Function
mode...
Adjusting the bass
1.Press A-M button ( and select “BASS”.
2.Press Up button & to emphasize the bass, or press Down button *to attenuate the bass.
∗The factory default setting is “0”. (Adjustment range: − 6 to +6)
3.When the adjustment is complete, press A-M button (several times until the function mode is reached.
Adjusting the treble
1.Press A-M button ( and select “TREB”.
2.Press Up button & to emphasize the treble, or press Down button * to attenuate the treble.
∗The factory default setting is “0”. (Adjustment range: − 6 to +6)
3.When the adjustment is complete, press A-M button (several times until the function mode is reached.
Adjusting the balance
1.Press A-M button ( and select “BAL”.
2.Press Up button & to emphasize the sound from the right speaker, or press Down button * to emphasizes the sound from the left speaker.
∗The factory default setting is “0”. (Adjustment range: L13 to R13)
3.When the adjustment is complete, press A-M button (several times until the function mode is reached.
Adjusting the fader
1.Press A-M button ( and select “FAD”.
2.Press Up button & to emphasize the sound from the front speakers, or press Down but- ton * to emphasize the sound from the rear speakers.
∗The factory default setting is “0”. (Adjustment range: F12 to R12)
3.When the adjustment is complete, press A-M button (several times until the function mode is reached.
Adjusting the Z-enhancer
1.Press Z-EHCR button 2 and select the Z- enhancer mode (1 to 3) to adjust.
2.Press A-M button ( and select “Z-EHCR”.
3.Press Up button & or Down button * to ad- just Z-enhancer.
∗When Z-enhancer 1 is selected, you can adjust the bass in the range of ± 2.
∗When Z-enhancer 2 is selected, you can adjust the treble in the range of ± 2.
∗When Z-enhancer 3 is selected, you can adjust the bass and treble in the range of ± 2.
4.When the adjustment is complete, press A-M button (several times until the function mode is reached.
Turning on/off the loudness
The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.
1.Press and hold LOUD button ( for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.
2.Press and hold LOUD button ( for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.
FM reception
For enhanced | FM performance the |
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ® | tuner includes signal actuated |
stereo control and Multipath noise reduction cir- cuits.
Changing the reception area
This unit is initially set to USA frequency intervals of 10kHz for AM and 200kHz for FM. When using it outside the USA, the frequency reception range can be switched to the intervals below.
●Setting the reception area
1.Press FUNC button 7 and select the radio mode (FM or AM).
2.While pressing RDM button 8, each time you press and hold the number “1” of the Preset buttons 1 for 2 seconds or longer, the recep- tion area switches from inside the USA to out- side the USA or from outside the USA to in- side the USA.
∗Any station preset memories are lost when the reception area is changed.
Listening to the radio
1.Press FUNC button 7 and select the radio mode.
2.Press BAND button ! and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press Right button ¥or Left button %to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press BAND button ! and select the desired band (FM or AM).
∗If “MANU” is lit in the display, press and hold BAND button !for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press Right button ¥ or Left button % to au- tomatically seek to the next station.
When Right button ¥ is pressed, the station is sought in the direction of higher frequencies; if Left button % is pressed, the station is sought in the direction of lower frequencies.
