| lect “CLOCK”. |
3. | Press ENT button @. |
4. | Press Right button ¥ or Left button % to se- |
| lect the hour or the minute. |
5. | Press Up button & or press Down button * |
| to set the correct time. |
| ∗ The clock is displayed in 12-hour format. |
6. | Press ENT button @to store the time into memory. |
7. | Press ADJ button #to return to the previous mode. |
Note:
•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.
Switching the spectrum analyzer display patterns
You can select one out of 4 patterns or set it to off.
∗The factory default setting is “HIGH”.
1.Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display.
2.Press Right button ¥ or Left button % to se- lect “ANA SPD”.
3.Press Up button & or Down button * to set the speed of the spectrum analyzer display.
You can choose one of “LOW”, “MID” or “HIGH” for the speed of the spectrum analyzer display.
4.Press ADJ button # to return to the previous mode.
Entering titles
Titles up to 10 characters long can be stored in memory and displayed for radio or TV stations and CDs. The numbers of titles that can be entered for each mode are as follows.
8.Repeat steps 5 to 7 to enter up to 10 characters for the title.
9.Press and hold ENT button @ for 2 seconds or longer to store the title into memory and cancel title input mode.
Clearing titles
1.Play a CD or a CD in a CD changer, or tune a radio station or TV station that you want to clear the title for.
2.Press DISP button 3 and display the sub- title.
3.Press TITLE button #. “TITL” appears in the display and the display switches to the title input display.
4.Press BAND button !.
5.Press and hold ENT button @ for 2 seconds or longer to clear the title and cancel the title input mode.
1.Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display.
2.Press Right button ¥ or Left button % to se- lect “CONTRAST”.
3.Press Up button & or Down button * to ad- just the contrast.
4.Press ADJ button # to return to the previous mode.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display on or off.
∗The factory default setting is “ON”.
1.Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display.
2.Press Right button ¥ or Left button % to se- lect “MESSAGE”.
∗The factory default setting is “PATTERN 1”. Each time you press SPE-ANA button 4, the spectrum analyzer display pattern changes in the following order:
PATTERN 1 ➜ PATTERN 2 ➜ PATTERN 3 ➜
PATTERN 4 ➜ OFF ➜ PATTERN 1...
Note:
The spectrum analyzer display is unavailable dur- ing these operations below;
•Seek tuning and auto store in radio mode.
•Mute or pause.
•When “NO DISC” or an error message appears in the display.
Setting the sensitivity of the spec- trum analyzer
∗The factory default setting is “MID”.
1.Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display.
2.Press Right button ¥ or Left button % to se- lect “ANA SENS”.
3.Press Up button & or Down button * to set the sensitivity of the spectrum analyzer.
You can choose one of “LOW”, “MID” or “HIGH” for the sensitivity of the spectrum ana- lyzer.
16 DMX5555z
Radio mode | 30 titles |
CD mode | 100 titles |
TV mode | 15 titles |
CD changer mode | Number of titles |
CDC655z connected | 60 titles |
CDC655Tz connected | 100 titles |
CDC1255z connected | 50 titles |
1.Press FUNC button 7 to select the mode you want to enter a title. (radio, CD, CD changer or TV)
∗ Titles cannot be entered for MDs with this unit.
2.Select and play a CD or a CD in the CD changer, or tune to an appropriate TV or radio station.
3.Press DISP button 3 and display the title.
4.Press TITLE button #. “TITL” appears in the display and the cursor position flashes.
5.Press Right button ¥or Left button %to move the cursor.
6.Press DISP button 3 to select a character. Each time you press DISP button 3, the char- acter changes in the following order:
Capital letters ➜ Small letters ➜ Numbers/ Symbols ➜ Capital letters...
Adjusting the way of title scrolling
There are 3 ways for scrolling a title in the dis- play. You can select the way you prefer.
∗The factory default setting is “AUTO”.
1.Press and hold ADJ button # for 1 second or longer to switch to the adjustment selection display.
2.Press Right button ¥ or Left button % to se- lect “SCROLL”.
3.Press Up button & or Down button * to change the display. Each time Up button & or Down button * is pressed, the display changes among the 3 display methods avail- able.
AUTO:
The title automatically scrolls over and over again.
1-TIME:
A title scrolls once. To have title scroll again, press TITLE button #.
MANUAL:
You must press TITLE button # to scroll the display.
4.Press ADJ button # to return to the previous mode.
3.Press Up button & to set the message dis- play to “ON”; press Down button * to set the message display to “OFF”.
5.Press ADJ button # to return to the previous mode.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
DMX5555z 17
