DRX8675z 17
Other Handy Functions
Adjusting the display contrast
You can adjust the display contrast according to
the angle of installation of the unit.
∗ The factory default setting is “6”. (Adjustment level:
1 to 11)
1. Press and hold ADJ button 4 f or 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “CONTRAST”.
3. Press ENT button 2.
4. Turn the Rotary knob & clockwise or
counterclockwise to adjust the contrast.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6. Press ADJ button 4 to return to the previous
mode.
Setting the SEARCH button
illumination color (Prism function)
The change in the SEARCH button illumination
color according to the unit operating state is
called the “Prism function”. You can set the
illumination pattern you prefer.
∗ The factory default setting is “PATTERN 1”.
1. Press and hold ADJ button 4 f or 1 second or
longer to switch to the adjustment selection
display.
2. Press the right or left side of SEARCH button
% to select “PRISM KEY”.
3. Press ENT button 2.
4. Turn the Rotary knob & clockwise or
counterclockwise to set the illumination
pattern. Each time you turn the Rotary knob
&, the illumination pattern changes in the
following order:
PATTERN 1 ➜ PATTERN 2 ➜ OFF ➜
PATTERN 1...
PATTERN 1:
The color changes for each function mode,
station tuning, scanning and other operations.
PATTERN 2:
In addition to the changes in Pattern 1, the
color changes according to the audio level.
OFF:
The color changes according to the function
mode.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6. Press ADJ button 4 to return to the previous
mode.
Message display
When the unit is powered on or off , a message is
displayed. The user can turn this message display
on or off.
∗ The factory default setting is “ON”.
1.
Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection displa y .
2. Press the right or left side of SEARCH button
% to select “MESSAGE”.
3. Press ENT button 2.
4.
Turn the Rotary knob & clockwise to set the
message display to “ON”; turn it counterclockwise
to set the message display to “OFF”.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6.
Press ADJ button 4 to return to the previous mode.
NON-FADER output adjustment display on/off
If you do not want to adjust the non-fader output
level, you can turn off the “NON-FAD VOL” display.
∗ The factory default setting is “ON”.
∗Even if you set the level adjustment display to
“OFF”, a signal is output from the non-fader output.
1.
Press and hold ADJ button 4 for 1 second or
longer to switch to the adjustment selection displa y .
2. Press the right or left side of SEARCH button
% to select “NON-FADER”.
3. Press ENT button 2.
4. Tur n the Rotary knob & clockwise to set the
non-fader output adjustment display to “ON”;
turn it counterclockwise to set the non-fader
output adjustment display to “OFF”.
ON:
When A-M button $ is pressed, the “NON-
FAD VOL” item is displayed.
∗You can adjust the output level.
OFF:
Even when you press A-M button $, the
“NON-FAD V OL” item is not displayed.
∗You cannot adjust the output level.
5. Pressing ENT button 2 returns to the
adjustment selection display.
6.
Press ADJ button 4 to return to the previous mode.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio
signal automatically when a cellular telephone
rings in the car.
∗This function is not compatible with all cellular
telephones. Contact your local authorized Clarion
dealer for information on proper installation and
compatibility.