Clarion DRX9575Rz owner manual Adjusting the bass, Adjusting the treble, Adjusting the Z-enhancer

Basic Operations

Adjusting the bass

1.Press A-M button % and select “SOUND”.

2.Press the right or left side of SEARCH button

2 to select “BASS”.

3.Turning the Rotary knob 3 clockwise empha- sizes the bass; turning it counterclockwise attenuates the bass.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

∗The bass cannot be adjusted if the tone by- pass setting is “YES” (ON).

4.When the adjustment is complete, press A-M button % several times until the function mode is reached.

Adjusting the treble

1.Press A-M button % and select “SOUND”.

2.Press the right or left side of SEARCH button

2 to select “TREBLE”.

3.Turning the Rotary knob 3 clockwise empha- sizes the treble; turning it counterclockwise attenuates the treble.

∗The factory default setting is “0”. (Adjustment range: –6 to +6)

∗The treble cannot be adjusted if the tone by- pass setting is “YES” (ON).

4.When the adjustment is complete, press A-M button % several times until the function mode is reached.

3.Turning the Rotary knob 3 clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: FRONT12 to REAR12)

4.When the adjustment is complete, press A-M button % several times until the function mode is reached.

Adjusting the Z-enhancer

1.Press Z-EHCR button 8 and select the Z- enhancer mode (1-3) to adjust.

2.Press A-M button % and select “Z-ENHANCER”.

3.Turning the Rotary knob 3 clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

∗When Z-Enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-Enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-Enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is complete, press A-M button % several times until the function mode is reached.

Note:

•If a Z-enhancer (1-3) is ON, tone bypass cannot be set.

Adjusting the balance

1.Press A-M button % and select “POSITION”.

2.Press the right or left side of SEARCH button 2 to select “L/R” (LEFT/RIGHT).

3.Turning the Rotary knob 3 clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: LEFT13 to RIGHT13)

4.When the adjustment is complete, press A-M button % several times until the function mode is reached.

Adjusting the fader

1.Press A-M button % and select “POSITION”.

2.Press the right or left side of SEARCH button

2 to select “F/R” (FRONT/REAR).

Turning on/off the loudness

The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.

1.Press and hold LOUD button % for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.

2.Press and hold LOUD button % for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.

Note:

•When using a sold separately digital sound processor (DPH7500z), a feature called auto loudness is selected. This function is different from the loudness effect. For further details on the auto loudness feature, refer to the subsection “Output adjustment of auto loudness, subwoofer and playback band”.

12 DRX9575Rz