Radio Operations
FM Reception
For enhanced FM performance the ® tuner includes signal actuated stereo control, Enhanced Multi AGC, Impulse noise reduction curcuits and Multipath noise reduction circuits.
Listening to the radio
1.Press FUNC button 5 and select the radio mode. The frequency or PS is displayed.
∗ PS: Programe service name
2.Press BAND button 4 and select the radio band. Each time the button is pressed, the radio reception band changes in the follow- ing order:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
3.Press the right or left side of SEARCH button
2 to tune in the desired station.
Tuning
There are 3 types of tuning mode available, seek tuning, manual tuning and preset tuning.
Seek tuning
1.Press BAND button 4 and select the desired band. (FM or AM)
∗If “MANU” is lit in the display, press and hold BAND button 4 for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.
2.Press the right or left side of SEARCH button 2 to automatically seek a station.
When the right side of SEARCH button 2 is pressed, the station is sought in the direction of higher frequencies; if the left side of SEARCH button 2 is pressed, the station is sought in the direction of lower frequencies.
Manual tuning
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one step at a time. In quick tuning mode, you can quickly tune the desired frequency.
1.Press BAND button 4 and select the desired band. (FM or AM)
∗If “MANU” is not lit in the display, press and hold BAND button 4 for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.
2.Tune into a station.
●Quick tuning:
Press and hold the right or left side of SEARCH button 2 for 1 second or longer to tune in a station.
●Step tuning:
Press the right or left side of SEARCH button
2to manually tune in a station.
Recalling a preset station
Atotal of 24 preset positions
1.Press BAND button 4 and select the desired band. (FM or AM)
2.Press S button # to display the preset channel display.
3.Press the corresponding Preset button $ to recall the stored station.
∗Press and hold one of Preset buttons $ for 2 seconds or longer to store that station into preset memory.
Manual memory
1.Press BAND button 4 and select the desired band. (FM or AM)
2.Press S button # to display the preset channel display.
3.Select the desired station with seek tuning, manual tuning, or preset tuning.
4.Press and hold one of Preset buttons $ for 2 seconds or longer to store the current station into preset memory.
Auto store
Auto store is a function for storing up to 6 stations that are automatically tuned in sequentially. If 6 receivable stations cannot be received, a previously stored station remains unoverwritten at the memory position.
1.Press BAND button 4 and select the desired band. (FM or AM)
2.Press S button # to display the subdisplay.
3.Press and hold the number “2” of Preset but- tons $ for 2 seconds or longer. The stations with good reception are stored automatically to the preset channels.
∗If auto store is performed in the FM bands, the stations are stored in FM3 even if FM1 or FM2 was chosen for storing stations.
DRX9575Rz 13