Clarion DXZ646MP CD/MP3/WMA Operations, Listening to a disc already loaded in the unit, Disc-In-Playfunction, Backup Eject function, Loading a CD, Pausing play

CD/MP3/WMA Operations

Setting	Set to CD	Set to MP3/WMA
Disc
Mixed with CD and	Play CD	Play MP3/WMA
MP3/WMA type tracks
CD type track only	Play CD	Play CD
MP3/WMA type track only	Play MP3/WMA	Play MP3/WMA

2.After making these settings, remove the disc and then reinsert it.

3.When a mixed mode CD is loaded and CD is set, the track to be played first is MP3/WMA file data and no sound is heard.

Note:

•When playing a CCCD (Copy Control CD), set the setting to CD type. When this is set to MP3/WWA type, the CD cannot be played normally in some cases.

Listening to a disc already loaded in the unit

Press the [FNC] button to select the CD/MP3/ WMA mode.

When the unit enters the CD/MP3/WMA mode, play starts automatically.

If there is no disc loaded, the indication “NO DISC” appears in the title display.

∗The mode changes each time the [FNC] button is pressed. (Modes are not displayed for equipment that is not connected.)

Radio CD/MP3/WMA(CD changer)AUX(TV) (DVD changer)

English

Disc-In-Play function

As long as the ignition key is turned to the ON or ACC position, this function allows you to turn the power to the unit and start playing the disc automatically when the disc is inserted even if the power is not turned on.

CAUTION

•Do not try to put your hand or fingers in the disc insertion slot. Also never insert for- eign objects into the slot.

•Do not insert discs where adhesive comes out from cellophane tape or a rental CD la- bel, or discs with marks where cellophane tape or rental CD labels were removed. It may be impossible to extract these discs from the unit and they may cause the unit to break down.

Backup Eject function

Just pressing the [Q] button ejects the disc even if the power to the unit was not turned on.

1.Press the [OPEN] button to open the FLIP DOWN PANEL.

Note:

•If the FLIP DOWN PANEL will not open far enough, open it gently with your hand.

2.Press the [Q]button. Remove the disc after it is ejected.

3.Close the FLIP DOWN PANEL.

Note:

•Always close the FLIP DOWN PANEL once you take out the disc.

Loading a CD

1.Press the [OPEN] button to access the CD SLOT behind the FLIP DOWN PANEL.

2.Insert a CD into the center of the CD SLOT with the labeled side facing up. The CD plays automatically after loading.

Notes:

•Never insert foreign objects into the CD SLOT.

•If the CD is not inserted easily, there may be another CD in the mechanism or the unit may require service.

•Discs not bearing the or mark and CD-ROMs cannot be played by this unit.

•Some CDs recorded in CD-R/CD-RW mode may not be usable.

Loading 8 cm compact discs

∗No adapter is required to play an 8 cm CD.

∗Insert the 8 cm CD into the center of the insertion slot. 3. Close the FLIP DOWN PANEL.

CAUTION

Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL.

Notes:

•If the FLIP DOWN PANEL does not open fully, gently open with your hand.

•After loading a CD, always close the FLIP DOWN PANEL.

Pausing play

1.Press the [ ] button to pause play. “PAUSE” appears in the display.

2.To resume CD play, press the [ ] button again.

DXZ646MP 17