English

CD/MP3/WMA Operations

Play list mode

This function allows you to play tracks, up to latest 5 time stamps, by reading the play list information written on the disc.

1.Press and hold the [PLAY LIST] button for 1 second or longer to turn on or off the play list mode.

∗Play list play is possible only when there is a file whose extension is “.M3U” on the CDR- RW.

∗Up to 5 play lists can be recognized, and up to 255 files can be recognized per play list.

2.Press the [a] or [d] button to change the track.

3.Press the [DN] button to move to the previ- ous play list.

Press the [UP] button to move to the next play list.

Notes:

•The SCN/RPT/RDM functions cannot be used while in the play list mode.

•The title display changes from folder name to play list name.

Making a play list

1.Write desired tracks to a CD-R/RW, etc. Be sure to use alphanumeric/ASCII characters for all file names.

2.Make a play list by using a multimedia player, etc. and save the data. The file format must be M3U.

3.Again, write this play list to the CD-R/RW, etc.

Notes:

•When writing to a CD-R/RW, etc., be sure to use alphanumeric/ASCII characters.

•Up to 5 layers can be recognized as a list. For written play lists, latest 5 lists are recognized in the order in which they are written.

•When writing to a CD-R/RW, etc., turn off the Disc At Once function.

•When adding a play list, it is recommended to write it in the “Root” folder.

Different pieces of music heard by plural listeners (2-ZONE function)

About the 2-ZONE function

The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural listeners to enjoy separate music sources.

This unit can control its internal sources (radio, CD, MP3, etc.) to play back them, and further, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.).

The sources of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone systems (WH104/WH204).

Notes:

•Except AUX, the MAIN and SUB zones cannot si- multaneously use sources inside this unit.

Also, external equipment connected via CeNET cannot simultaneously be used.

•The TV mode while the 2-ZONE function is tuned on is forced to change to “VTR playback.”

•The ISR function cannot be operated when the 2- ZONE function is turned on.

•The Audio mode and Z-enhancer function cannot be set for the sources of the SUB zone.

•If any of following external equipment is con- nected, this function is disenabled.

•5.1 channel surround decoder (DVC920)

Setting the 2-ZONE function

The initial setting is “OFF”.

When you have set the 2-ZONE function to “ON” in the initial state, the MAIN zone services for sources inside this unit and the SUB zone, for AUX. Changing a source during later use causes the latest heard source to be invoked.

Press and hold the [ ] button for 1 second or longer to turn on or off. When the 2-ZONE function is turned on, “2-ZONE ON” on the display lights.

20 DXZ646MP