Basic Operations

Adjusting the Z-Enhancer Plus

1.Press the [Z+] button and select the Z-En- hancer Plus mode to adjust.

2.Press the [A-M] button and turning the

[ROTARY] knob clockwise adjusts in the + direction; turning it counterclockwise adjusts in the – direction.

●When “B-BOOST 0” selected, you can ad- just the bass in the range of –3 to 3.

●When “IMPACT 0” selected, you can adjust the bass and treble in the range of –3 to 3.

●When “EXCITE 0” selected, you can adjust the bass and treble in the range of –3 to 3.

∗When Z-Enhancer Plus is selected, press and hold the [Z+] button for 1 second or longer to change to the “CUSTOM” mode.

Bass/treble characteristics become flat and the indication “Z+ FLAT” is shown in the dis- play.

2.Turning the [ROTARY] knob clockwise increases the output volume; turning it counterclockwise decreases the output volume.

∗The factory default setting is “0”. (Setting range: –6 to 6)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the bass (Gain,

Frequency, Q-curve)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turning the [ROTARY] knob clockwise em- phasizes the bass; turning it counterclock- wise attenuates the bass.

∗The factory default setting is “BÅGAIN 0Δ. (Adjustment range: –6 to +8)

English

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “BASS BOOST” is set“SW-VOL 0” ➜ “B-BOOST 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.●When “IMPACT” is set“SW-VOL 0” ➜ “IMPACT 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.●When “EXCITE” is set“SW-VOL 0” ➜ “EXCITE 0” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.●When “CUSTOM” is set“SW-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FADER 0” ➜ Last function mode.●When “Z+ OFF” is set“SW-VOL 0” ➜ “BAL 0” ➜ “FADER 0” ➜Last function mode.

∗If subwoofer function is set “ON”, “SW-VOL 0” can be selected.

Adjusting the subwoofer output volume

You can adjust the volume output from the unit’s subwoofer output terminal.

1.Press the [A-M] button and select “SW-VOL 0”.

3.Press the [a] or [d] button to select “BÅFREQ 50Δ.

Turn the [ROTARY] knob clockwise or coun- terclockwise to select the frequency.

∗The factory default setting is “BÅFREQ 50Δ. (Adjustment 50/80/120 Hz)

4.Press the [a] or [d] button to select “BÅQ 1Δ.

Turn the [ROTARY] knob clockwise or coun- terclockwise to select the Q-curve.

∗The factory default setting is “BÅQ 1Δ. (Adjustment 1/1.25/1.5/2)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble (Gain,

Frequency)

This adjustment can be performed when the Z- Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turning the [ROTARY] knob clockwise em- phasizes the treble; turning it counterclock- wise attenuates the treble.

∗The factory default setting is “TÅGAIN 0Δ. (Adjustment range: –6 to +6)

3.Press the [a] or [d] button to select “TÅFREQ 12KΔ.

Turn the [ROTARY] knob clockwise or coun- terclockwise to select the frequency.

DXZ646MP 13