Basic Operations

For details, refer to the subsection “Turning the screen saver function on or off” in section “Operations Common to Each Mode.”

●When the power is turned off

1.Each time you press the [D] button, the clock time appears or disappears in the display.

Setting the Z-Enhancer

This unit are provided with 3 types of sound tone effects stored in memory. Select the one you prefer.

∗The factory default setting is “OFF”.

Adjusting the bass

The bass gain can be adjusted as follows.

1.Press the [A-M] button and select “BASS 0”.

2.Turn the [ROTARY] knob to adjust the gain, –6 to 7 (The factory default setting is “0”).

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble

The treble gain can be adjusted as follows.

English

Each time you press the [Z] button, the tone effect changes in the following order:

“OFF” ➜ “BASS BOOST” ➜ “IMPACT” ➜

“EXCITE” ➜ “OFF” ...

•BASS BOOST : bass emphasized

•IMPACT : bass and treble emphasized

•EXCITE : bass and treble emphasized mid deemphasized

• OFF

: no sound effect

Adjusting the tone

Press the [A-M] button and select the item to adjust. Each time you press the [A-M] button, the item changes as following order:

●When “BASS BOOST” is set “BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “IMPACT” is set

“BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “EXCITE” is set

“BALANCE 0” ➜ “FADER 0” ➜ Last function mode.

●When “OFF” is set

“BASS 0” ➜ “TREB 0” ➜ “BALANCE 0” ➜ “FADER 0” ➜ “Last function mode.

1.Press the [A-M] button and select “TREB 0”.

2.Turn the [ROTARY] knob to adjust the gain, –6 to 6 (The factory default setting is “0”).

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

1.Press the [A-M] button and select “BALANCE 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the right speaker; turning it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

1.Press the [A-M] button and select “FADER 0”.

2.Turning the [ROTARY] knob clockwise emphasizes the sound from the front speakers; turning it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Note:

•During A-M adjustment mode, if no operation is performed for more than 7 seconds, this mode can be cancelled and return to previous mode.

DXZ665MP 15