Operations Common to Each Mode

●Setting the method for title scroll

Set how to scroll in CD-TEXT, MP3/WMA title.

∗The factory default setting is “ON”.

2-1. Select “ AUTO SCRL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

To scroll automatically.

• OFF:

To scroll just 1 time when the title was changed or the [T] button was pressed for 1 second or longer.

●Dimmer control

You can set the dimmer control “ON” or “OFF”.

∗The factory default setting is “ON”.

2-1. Select “ DIMMER”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

To change other settings

1.Press the [ADJ] button to switch to the adjustment selection display.

2.Press the [å, ∂] lever upward or downward to select the “item name”. Each time the [å, ∂] lever is pressed up/down, the item display changes in the following order:

“ BLINK LED” ↔ “

AMP CANCEL”

↔ “ SID DISP” ↔ “

AUX SENS” ↔

“ SYSTEM”

3.Turn the [ROTARY] knob to select the “desired setting item”.

∗ After completing settings, press the [ADJ] button to return to the previous mode.

●Setting the external amplifier

∗The factory default setting is “OFF”.

2-1. Select “ AMP CANCEL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

Use with connected AMP.

• OFF:

Use with inside AMP.

●Displaying the Satellite ID No.

∗This function only applies when a Satellite receiver is connected.

∗The factory default setting is the upper 6 digits.

2-1. Select “ SID DISP”.

3-1. Turn the [ROTARY] knob to switch between the display for the upper 6 digits and lower

6digits.

●Selecting AUX IN sensitivity

Make the following settings to select the sensitivity when sounds from external devices connected to this unit are difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

2-1. Select “ AUX SENS”.

3-1. Turn the [ROTARY] knob to select “LOW”, “MID” or “HIGH”.

●Performing a system check

This function allows you to perform a system check from the adjust mode when required.

2-1. Select “ SYSTEM ”.

3-1. Press and hold the [ ] button for 1 second or longer.

“SYSTEM CHECK” appears in the display, then the unit returns to the previous operation mode.

English

●Anti-theft indicator

The red Anti-theft indicator is a function for preventing theft. When the DCP is removed from the unit, this indicator blinks.

∗The factory default setting is “OFF”.

2-1. Select “ BLINK LED”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

DXZ665MP 23