Operations Common to Each Mode

English

●Setting the spectrum analyzer pattern

∗The factory default setting is “PTN 1”

2-1. Select “S-A PTN”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“PTN 1” ↔ “PTN 2”

●Setting the sensitivity of the spectrum

analyzer

This function allows you to adjust the sensitivity of the spectrum analyzer.

∗The factory default setting is “MID”

2-1. Select “S-A SENS”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“HIGH” ↔ “MID” ↔ “LOW”

●Setting the speed of the spectrum

analyzer

This function allows you to adjust the speed of the spectrum analyzer.

∗The factory default setting is “HIGH”

2-1. Select “S-A SPEED”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“HIGH” ↔ “MID” ↔ “LOW”

●Setting the power message

You can set the power message “ON” or “OFF”. The message is “Clarion”.

∗The factory default setting is “ON”.

2-1. Select “ POWER MSG”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

• ON:

When the power is on or off, the message will appear in the display.

• OFF:

When the power is on or off, the message won’t appear in the display.

●Turning the screen saver function on

or off

This unit is provided with the screen saver function which allows you to show various kinds of patterns and characters in the operation status indication area of the display in a random order. You can turn on or off this function. If the button operation is performed with the screen saver function on, the operation display corresponding to the button operation is shown for about 30 seconds and the display returns to the screen saver display.

∗The factory default setting is “OFF”.

2-1. Select “ SCRN SVR”.

3-1. Turn the [ROTARY] knob to select the setting.

Each time you turn the [ROTARY] knob, the setting changes in the following order:

“OFF” ↔ “MSG INFO” ↔ “DEMO”

●Entering MESSAGE INFORMATION

Message up to 30 characters long can be stored in memory and displayed as a type of screen saver setting.

∗The factory default setting is “Welcome to Clarion”.

2-1. Select “ MSG INPUT ”.

3-1. Press the [

] button.

3-2. Press and hold the [BND] button for 1 second or longer to clear the old message.

3-3. Press the [å, ∂] lever upward or downward to move the cursor.

3-4. Press the [BND] button to select a character. Each time you press the [BND] button, the character changes in the following orders:

Capital letters ➜ Small letters ➜ Numbers/ Symbols ➜ Umlaut ➜ Capital letters…

3-5. Turn the [ROTARY] knob to select the desired character.

3-6. Repeat step 3-3 to 3-5 to enter up to 30 characters for message.

3-7. Press and hold the [ ] button for 2 seconds or longer to store the message in memory and cancel input message mode. Press and hold the [BND] button for 1 second or longer to cancel the input message. Then press and hold the [ ] button for 2 seconds or longer to store the message and the message return to default setting.

22 DXZ665MP