English
5. OPERATION
Start-up
After connecting your iPod to the EA1251, the iPod display will change to the following:
iPod
OK to disconnect
To start iPod operations, change the main unit mode to CD Changer mode. Playback will start automatically.
The display changes from:
Disc Check Æ Disc Repeat Æ Start Playing
If the iPod is not connected, the main unit will display “No Magazine”.
The main unit is unable to detect the presence of iPod if the battery of the iPod is flat.
Please refer to the Playback section for detailed operation information.
Disconnecting
iPod automatically switches “on” after connecting to EA1251, and it’s power is charged as long as it stays connected with the vehicle ignition key turn to ACC or ON.
To switch off iPod manually, disconnect from EA1251 adaptor.
If vehicle ignition is turned to ACC off, playback is changed to pause, and iPod will go to power off mode in a few minutes.
Playback
iPod buttons are disabled and the display is lock after it is connected to EA1251. All operations of the iPod are controlled from the main unit. Some iPod operations and features will be unavailable. Please read this manual carefully to optimize your iPod operations.
To understand playback features better, please refer to PLAYLIST section.
Songs number display
During playback, the main unit will display the song number in sequence. However, only a maximum of two digits are displayed. If there are more than 99 songs in your iPod, only the last two digits will be displayed. For example, songs number 102 and 1002 will both be displayed as “02”.
Default playback setting
By default, the playback setting will be:
•Start to play from DISC1 (All Songs Play)
•Shuffle (Random) Off
•DISC Repeat On
When the iPod is connected, the main unit will initially display “DISC” and “RPT”.
Play/Pause
Press Play/Pause button on the main unit to play/ pause iPod playback.
6
