English
Setting the low-pass frequency
Set the low pass frequency switch on the top of the EQS746 to either 60Hz or 90Hz depending on the subwoofer and subwoofer amplifier requirements.
Connecting an MP3 player or video unit
1.Plug the MP3 player or video unit into the auxiliary RCA input on the back of the EQS764 unit.
2.Make sure the auxiliary button on the front of the unit is out, ready to receive input from the main RCA input (not the auxiliary RCA input).
3.Turn the EQS764 master volume to a normal listening level.
4.Press the play button on the auxiliary source.
5.Push in the AUX button to change to the auxiliary source.
6.Using a small flathead screwdriver, adjust the AUX gain controls located on the top of the unit so that the volume of the auxiliary source matches the volume of the main source.
Care and maintenance
Cleaning the cabinet
Use a soft, dry cloth to gently wipe dust and dirt from the unit.
Do not use benzene, thinner, car cleaner, or other cleaners. These substances may damage the unit or cause the paint to peel.
Servicing the equalizer/crossover unit
In the event that trouble arises, never open the case or disassemble the unit. The internal parts are not serviceable by the user. Opening any components will void the warranty.
CAUTION!
Changes or modifications to this product that are not approved by the manufacturer will void the warranty and will violate FCC approval.
8 | EQS746 |
EQS746_OwnersManual.pmd | 8 |
