unlocking
Pressing 
for one second unlocks the doors (if connected). The horn will honk twice (if connected) and the parking lights will flash twice to confirm unlocking of the system. The optional Starter Kill will be deac- tivated. The status LED will turn off, unless the system is programmed for Passive Mode. In Passive Mode, the status LED will flash rapidly when the system is disabled. This indicates that the system will re- engage the starter kill and
disabling the starter kill without a remote
If your remote is lost or damaged, you can manually override the starter kill. To do this, you must have the vehicle's ignition key and know where the Override switch is located. Be sure to check with the installer for the location of the Override switch.
To override the starter kill, turn the ignition on and press the Override switch within 10 sec-
onds. The status LED will stop 
flashing and the vehicle should start. If it does not start, you may have waited too long; turn the ignition off and repeat the process.
LOCATION OF OVERRIDE SWITCH ____________________________
9
