✂
QUICK REFERENCE GUIDE:
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂
To lock using your remote
■To lock the system press 
for one second. The doors will lock (if con- nected). The LED will begin to flash. The Starter Kill will prevent the
vehicle’s starter from cranking if it has been installed. The vehicle’s horn (if connected) will honk and the parking lights will flash once to con- firm activation of the system.
To unlock using your remote
■To unlock the system press 
for one second. The doors will unlock (if connected). The Starter Kill will be deactivated and the vehicle’s horn
(if connected) will honk twice and the parking lights will flash twice.
Disabling the Starter Kill without a remote
■Turn on the ignition. Press and release the Override switch within 10 seconds. The LED will stop flashing and the vehicle should start. Be sure to check with the installer for the location of the Override switch.
To remote engine start the vehicle
■Press 
twice within 3 seconds. The parking lights will turn on (if con- nected) and the vehicle will start and run for the programmed amount
of time.
To enter or exit override mode
■Turn the ignition to the "ON" position. Turn the ignition back off. Press and release the Override switch within 10 seconds. The status LED will light continuously if you have entered override mode. To exit override mode, repeat the steps above. The LED will turn off when exiting override mode.
To activate panic mode
■Press and hold 
for 1.5 seconds.
To disable the remote engine start system
■To disable the remote engine start, move the shutdown toggle switch to the OFF position.
Location of Shutdown Switch______________________________
23
