4)Press the Right button 18 , then set the current minute.
5)Press the BND button 16 , then the clock is set.
Notes:
•If you select another operation mode while you are setting the clock, the clock setting operation will be canceled.
•If you remove the vehicle’s battery for a check or repair, the clock will be reset, so you must set it again.
English
Radio Mode Operations
FM Reception
For enhanced FM performance the 
® tuner includes signal actuated stereo control and Multipath noise reduction circuits.
Listening to the Radio
1)Press the FNC button 3 to select the radio mode, then the radio will be on.
2)To select a preset band, press the BND but- ton 16 , then select one of the preset bands such as FM1, FM2, FM3, or AM. Every time the BND button 16 is pressed, the display will change as:
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1
3)Press the Left/Right button 18 , then the sta- tion at which there is a broadcast will be selected (Seek selection).
Manual Tuning
1)Press the BND button 16 , then select FM1, FM2, FM3 or AM.
2)Press and hold the BND button 16 for 2 sec- onds or longer, then the display will show “MANU,” which means that a manual selec- tion function is on.
3)Press the Left/Right button 18 and select the right station.
Seek Tuning
1)Press the BND button 16 , then select FM1, FM2, FM3 or AM.
2)If the “MANU” on the display is on, press and hold the BND button 16 for 2 seconds or longer. When the “MANU” display is off, the Seek Selection function is on.
3)Press the Left/Right button 18 , then when it selects the station in which there is a broad- cast, it automatically stops.
Preset Memory Function
Preset Memory Function can store up to 24 sta- tions: six stations for each of FM1, FM2, FM3 and AM.
Note:
•When the present memory function is used, all the content of the memory will be erased.
10
