Manual memory function
1)Press the BND button 16 , and select the band you want to store in the memory.
2)Press the Left/Right button 18 then select the station you want to store in the memory.
3)Press and hold the Preset button 9 for 2 seconds or longer, then the station will be stored in the memory.
Auto store function (Automatic Station Store)
1)Press the BND button 16 , then select the band you want to store in the memory.
2)Press and hold the AS button 6 for 2 sec- onds or longer, then the station at which the reception is the strongest will be automatical- ly stored in the memory.
Note:
•When the number of stations stored is less than six, the previous content of the memory for each direct button will be retained.
Preset Scanning (Preset Station Scan)
When the PS button 5 is pressed, the preset memory numbers flash and the stations are tuned in for 7 seconds each in the order in which they were stored. Press the PS button again to cancel the preset scanning mode.
Instant Station Recall (ISR)
With this function, a specific radio station can be recalled from any mode.
ISR memory
1)Press the FNC button 3 , then select the radio mode.
2)Select the radio station which you want to store in the memory.
3)Press and hold the ISR button 7 for 2 sec- onds or longer.
Recalling ISR
Press the ISR button 7 then the display will show “ISR,” then the radio station previously memorized will be selected. Press the ISR but- ton 7 again to disengage the unit from the Recalling ISR function.
Area Change
Use this function when you are using the car stereo anywhere outside the U.S.
Switchable frequency spacing
This car stereo is initially set to tune in frequen- cy intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range.
The table below lists the frequency specifica- tions for the U.S. and other countries.
|
| Initial Setting | New Setting | |
|
| (U.S. standard) | (outside U.S.) | |
|
|
|
| |
| Frequency | 10 kHz | 9 kHz | |
| spacing | |||
|
|
| ||
AM |
|
|
| |
Frequency | 530 to | 531 to | ||
| ||||
| range | 1,710 kHz | 1,629 kHz | |
|
|
|
| |
| Frequency | 200 kHz | 50 kHz | |
| spacing | |||
|
|
| ||
FM |
|
|
| |
Frequency | 87.9 to | 87.5 to | ||
| ||||
| range | 107.9 MHz | 108 MHz | |
|
|
|
|
Switching the area change
Outside U.S. (New Setting)
While pressing the BND button 16 , press the RPT button 14 , then “outside U.S.” will be selected.
Inside U.S. standard (Initial Setting)
While pressing the BND button 16 , press the
RDM button 13 , then the “U.S. standard” will be selected.
English
11
