Clarion RMX855Dz owner manual Other Handy Functions

Other Handy Functions

Setting the clock

1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.

2.Press the right or left side of SEARCH button

%to select “CLOCK”.

3.Press ENT button 2.

4.Press the right or left side of SEARCH button

%to select the hour or the minute.

5.Turn the Rotary knob & clockwise or counterclockwise to set the correct time.

∗ The clock is displayed in 12-hour format.

6.Press ENT button 2 to store the time into memory.

7.Press ADJ button 4 to return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the ignition on. If you drain or remove the car’s battery or take out this unit, the clock is reset. While setting the clock, if another button or operation is selected, the clock set mode is canceled.

Dimmer level setting

You can reduce the display illumination linked to the car illumination.

∗The factory default setting is “LEVEL 3”.

1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.

2.Press the right or left side of SEARCH button

% to select “DIMMER LV”.

3.Press ENT button 2.

4.Turn the Rotary knob & clockwise or counterclockwise to set the dimmer level. Choose the dimmer level from the following.

“OFF”, “LEVEL 1”, “LEVEL 2”, “LEVEL 3”, “LEVEL 4”, “LEVEL 5”.

LEVEL 1 to LEVEL 5:

The greater the dimmer level is, the more the illumination is reduced.

OFF:

Even if the car illumination is turned on, reduction of the display illumination does not occur.

5.Pressing ENT button 2 returns to the adjustment selection display.

6.Press ADJ button 4 to return to the previous mode.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed for radio stations and CDs. The numbers of titles that can be entered for each mode are as follows.

Mode	Number of titles
Radio mode	30 titles
TV mode	15 titles
CD changer mode	Number of titles
CDC655z connected	60 titles
CDC655Tz connected	100 titles
CDC1255z connected	50 titles

1.Press FNC button 3 to select the mode you want to enter a title. (radio, CD changer or TV)

∗ Titles cannot be entered for MDs with this unit.

2.Select and play a CD in the CD changer or tune to an appropriate TV or radio station.

3.Press DISP button ! and display the subtitle.

4.Press TITLE button 4. “TITL” appears in the display and the cursor position flashes.

5.Press the right or left side of SEARCH button

% to move the cursor.

6.Press DISP button ! to select a character. Each time you press DISP button !, the character changes in the following order:

Capital letters ➜ Small letters ➜ Numbers ➜ Symbols ➜ Umlaut ➜ Capital letters...

7.Turn the Rotary knob & to select the desired character. Turning the Rotary knob & clockwise moves the cursor to the next character; turning it counterclockwise moves the cursor to the previous character.

8.Repeat steps 5 to 7 to enter up to 10 characters for the title.

9.Press and hold ENT button 2 for 2 seconds or longer to store the title into memory and cancel title input mode.

Clearing titles

1.Play a CD in a CD changer or tune a radio station or TV station that you want to clear the title for.

2.Press DISP button ! and display the subtitle.

3.Press TITLE button 4. “TITL” appears in the display and the display switches to the title input display.

4.Press BND button #.

5.Press and hold ENT button 2 for 2 seconds or longer to clear the title and cancel the title input mode.

Adjusting the display contrast

You can adjust the display contrast according to the angle of installation of the unit.

16 RMX855Dz