Clarion RMX855Dz Adjusting the balance, Turning on/off the loudness, Adjusting the fader

Basic Operations

Adjusting the balance Turning on/off the loudness

1.Press A-M button $ and select “BALANCE”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the right speaker; turn- ing it counterclockwise emphasizes the sound from the left speaker.

∗The factory default setting is “0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

The loudness effect emphasizes the bass and treble to create a natural sound tone. When you are listening to music at a low volume, it is rec- ommended to use the loudness effect.

1.Press and hold LD button $ for 1 second or longer to turn on the loudness effect. When the loudness effect is turned on, “LD” lights in the display.

2.Press and hold LD button $ for 1 second or longer to turn off the loudness effect. “LD” goes off in the display.

Adjusting the fader

1.Press A-M button $ and select “FADER”.

2.Turning the Rotary knob & clockwise empha- sizes the sound from the front speakers; turn- ing it counterclockwise emphasizes the sound from the rear speakers.

∗The factory default setting is “0”. (Adjustment range: F12 to R12)

Note:

•When using a sold separately digital sound pro- cessor (DPH7500z), a feature called auto loud- ness is selected. This function is different from the loudness effect. For further details on the auto loud- ness feature, refer to the subsection “Output adjustment of auto loudness, subwoofer and playback band”.

3.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Adjusting the Z-enhancer

1.Press Z-EHCR button 8 and select the Z- enhancer mode (1 to 3) to adjust.

2.Press A-M button $ and select “Z-EHCR”.

3.Turning the Rotary knob & clockwise adjusts

in the + direction; turning it counterclockwise adjusts in the − direction.

∗When Z-enhancer 1 is selected, you can adjust the bass in the range of ±2.

∗When Z-enhancer 2 is selected, you can adjust the treble in the range of ±2.

∗When Z-enhancer 3 is selected, you can adjust the bass and treble in the range of ±2.

4.When the adjustment is complete, press A-M button $ several times until the function mode is reached.

Note:

•If you set the Z-ENHANCER function to ON (1 to 3), you cannot set the tone bypass.

12 RMX855Dz