![](/images/new-backgrounds/1221311/22131119x1.webp)
Each setting has 30 steps of adjustment range and is preset at the factory to 15.
Once you’ve adjusted the picture, wait a moment and the adjustment menus disappear.
Turning the unit off and on
Press POWER at any time to turn the unit off.
When you turn the vehicle’s ignition off, the monitor automati- cally shuts off.
Switching between video sources
If your vehicle has two video sources, for example, a DVD player and a game console, you can easily switch between them.
1.Press SOURCE.
The monitor displays AUX1.
2.Press SOURCE again to select AUX2.
Note:
If you’re using only one video source, the screen remains dark when you select the unavailable source.
Playing two videos or games at once
If your vehicle is equipped with two LCD monitors in the headrests and two video source units, two different videos or games can play at the same time.
Each monitor transmits the infrared audio signal over its own channel, A or B. When a vehicle has two monitors, the default is to configure the monitor in the driver’s headrest to use IR channel A, and the monitor in the passanger’s headrest to use IR channel B. You can change this.
1.Press PICTURE several times to locate the IR CH option.
2.Press plus (+) or minus (+) to alternate between A and B.
Note:
You don’t need to select the IR channel if your vehicle has only one monitor or only one video source.
Changing the video output mode
1.Press PICTURE several times to locate the VIDEOSYS option.
2.Press plus (+) or minus (+) to alternate between NTSC and PAL.
10VMA5894 and VMA7194