Custom Mounting using the threaded insert
The base of the VMA6593 has a threaded insert (1/4 - 20). This insert can be used with the optional Clarion ZMT009 gooseneck mounting kit or with a 1/4
5. Wiring the VMA6593
The following pages display wiring diagrams for various VMA6593 configurations.
Read the following precautions before wiring your system.
•Disconnect the negative battery terminal before making any wiring connections.
•Be particularly careful where you route wires. Keep them away from the engine, exhaust system, etc. Heat may damage wires.
•If the fuse should blow, make sure all connections are correct and no wires are damaged before replacing the fuse. Always use fuses that are the same amperage value as the original. When replacing a fuse, never let the battery side touch any metal part or any other wire.
WARNING!
Be sure to disconnect the battery
VMA6593 9