Front-Panel Controls
6.5 INCH WIDE LCD MONITOR
| IR | SOURCE | |
POWER | receiver | ||
| |||
|
| ||
|
| WIDE | |
|
| PICTURE |
(+)and
adjustment keys
The [POWER] button turns the VMA6593 on and off.
Notes:
•Even after the VMA6593 is switched on, the screen remains dark until a video signal is detected.
•When the ignition switch is turned off, the VMA6593 automatically shuts off. The next time the ignition switch is turned on, the VMA6593 will remain off until the [POWER] button is pressed.
4VMA6593
The [SOURCE] button selects between the two video inputs of the VMA6593.
Note:
•If only one of the video inputs is used, the screen will remain dark when the unused input is selected.
The [WIDE] button changes the display mode from “wide” 16:9 mode to “normal” 4:3 mode.
4:3 |
| 16:9 |
|
|
|
Note:
•When using a DVD player as the source unit, make sure that the DVD player’s output mode is set to “Wide” or “16:9”, so that it will generate a video signal that can take advantage of the VMA6593’s aspect ratio. When using this display with sources that generate a “normal”, 4:3 image signal, such as videogames and videocassette players, the [WIDE] button will “stretch” the image to fit the screen. In this case, some minor image distortion may be visible.
