Clarion VRX925VD owner manual DSF mode, EQ mode

English Owner’s manual

Multiple Channel Processor Operations

Selecting t.he DSF mode or the		Setting and storing P.EQ Properties
P.EQ mode		1.	Press the [A-M] button to show the AUDIO
1.	Press the [A-M] button.		MODE menu.
2.	Touch the [STATUS] key to select “DSF” or	2.	Touch the [P.EQ] key to show the P.EQ
			adjusting display.
	“P.EQ”.
3.	Touch the [DSF] or [P.EQ] to select a desired	3.	Touch the key for the desirable type to select it.
	mode and to set the mode thus selected.		The P.EQ adjustment contents are as
4.	After setting, touch the [RNT] key or press the		follows:
	[A-M] button to return to the previous mode.		●SIGNAL

∗ The factory default setting is “P.NOISE”.

DSF mode

DSF effect ON/OFF

∗The factory default setting is “OFF”.

1.Press the [A-M] button.

2.Touch the [DSF] key to select “on” and “off”.

3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

4.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD screen.

Note:

•If the DSF effect is set to OFF, the adjustment made in “DSF” is not reflected in the music source.

Selecting the DSF type

1.Press the [A-M] button and touch the [DSF] key.

2.Touch the key for the desirable type to select it.

3.When the setting is finished, touch the [RTN] key or press the [A-M] button to return to the previous mode.

This function selects [P. NOISE] or [MUSIC].

●SPEAKER SELECT

∗The factory default setting is “FRONT”.

This function selects [FRONT], [CENTER] or [SURROUND].

●“BAND”

∗The factory default setting is “BAND1”.

Select the channel to be compensated (BAND1, BAND2, BAND3).

●“FREQUENCY”

∗The factory default setting is “1 kHz”.

Select the center frequency that you want to compensate from the range of 20 Hz to 20 kHz. (1/3 octave step, 31 points)

●“Q”

∗The factory default setting is “1”.

Set the sharpness of the Q-curve to one of the parameters: 1, 3, 5, 7 and 20.

●“GAIN”

∗The factory default setting is “0”.

Adjust the gain (output level) in the range of - 12 dB to +12 dB. (1 dB step, 25 points)

P.EQ mode

P.EQ effect ON/OFF

∗The factory default setting is “OFF”.

1.Press the [A-M] button.

2.Touch the [P.EQ] key to select “on” and “off”.

3.Each time the [ON/OFF] key is touched, the on and off statuses are switched alternately.

4.After the setting, press the [A-M] button again or touch the [RTN] key to return to the STANDARD screen.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ” is not reflected in the music source.

4.After making adjustments to a desired pattern by repeating the operations of item3, touch the [RNT] key or press the [A-M] button to return to the previous mode.

Selecting the Dolby PLII (Dolby Pro Logic II) type

1.Press the [A-M] button and touch the [Dolby PLII] key.

2.Touch the key for the desirable type to select it.

3.When the setting is finished, touch the [RTN] key or press the [A-M] button to return to the previous mode.

∗ The factory default is “off”.

60 VRX925VD