OPERATIONS

English

Adjusting the Z-Enhancer Plus

•This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

•Press and hold the [Z+] button for 1 second or longer, then the setting parameter of bass/treble will be initialized with a display “Z+FLAT”.

1.Press the [Z+] button and select the Z-Enhancer Plus mode to adjust.

2.Press the [A-M] button and select “B-BST 0” or “IMPACT 0” or “EXCITE 0”.

3.Turn the [ROTARY] knob to select from -3 to +3.

4.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the bass

(Gain, Frequency, Q-curve)

•This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

•This adjustment can only be performed when the Z-Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “BASS”.

2.Turn the [ROTARY] knob to adjust the bass.

•The factory default setting is “B<G 0>”. (Adjustment range: -6 to +8)

3.Move the [] / [] lever to select “B<F 50>”.

4.Turn the [ROTARY] knob to select the frequency.

•The factory default setting is “B<F 50>”. (Adjustment 50/80/120 Hz)

5.Move the [] / [] lever to select “B<Q 1>”.

6.Turn the [ROTARY] knob to select the Q-curve.

•The factory default setting is “B<Q 1>”. (Adjustment 1/1.25/1.5/2)

7.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the treble (Gain, Frequency)

•This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

•This adjustment can only be performed when the Z-Enhancer Plus is set to “CUSTOM”.

1.Press the [A-M] button and select “TREBLE”.

2.Turn the [ROTARY] knob to adjust the treble.

•The factory default setting is “T<G 0>”. (Adjustment range: -6 to +6)

3.Move the [] / [] lever to select “T<F 12K>”.

4.Turn the [ROTARY] knob to select the frequency.

•The factory default setting is “T<F 12K>”. (Adjustment 8 kHz/12 kHz)

5.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the balance

•This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

1.Press the [A-M] button and select “BAL 0”.

2.Turn the [ROTARY] knob to adjust the balance of the left and right speakers.

•The factory default setting is “BAL 0”. (Adjustment range: L13 to R13)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

Adjusting the fader

•This function cannot be adjusted when as follows: “Pro Logic” is set to “ON”, the speaker system is set to “5.1ch”, DVD/DTS-CD is being played.

1.Press the [A-M] button and select “FAD 0”.

2.Turn the [ROTARY] knob to adjust the balance of the front and rear speakers.

•The factory default setting is “FAD 0”. (Adjustment range: F12 to R12)

3.When the adjustment is complete, press the [A-M] button several times until the function mode is reached.

18 VXZ768R