OPERATIONS

Radio Operations

English

Listening to the radio

1.Press the [SRC] button and select the radio mode. The frequency or PS appears in the display.

• PS: Programme service name

2.Press the [BND] button and select the radio band. Each time the button is pressed, the radio reception band changes in the following order:

FM1 ➜ FM2 ➜ FM3 ➜ AM (MW/LW) ➜

FM1...

3.Move the [ ] / [ ] lever to tune in the desired station.

Tuning

There are 3 types of tuning modes available, seek, manual and preset tuning.

Seek tuning

1.Press the [BND] button and select the desired band (FM or AM (MW, LW)).

2.Tune into a station.

•If “MANU” is lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” in the display goes off and seek tuning is now available.

•If “TA” is lit in the display, TP stations are automatically sought.

zDX SEEK

1.Move the [ ] / [ ] lever to automatically seek a station.

2.When the lever is moved up, the station is sought in the direction of higher frequencies; if the lever is moved down, the station is sought in the direction of lower frequencies.

•When seek tuning starts, “DX SEEK” appears in the display.

zLOCAL SEEK

1.Move the [ ] / [ ] lever for 1 second or longer and local seek tuning is carried out.

Broadcast stations with good reception sensitivity are selected.

•When local seeking starts, “LO SEEK” appears in the display.

Manual tuning

There are 2 ways available: Quick tuning and step tuning.

When you are in the step tuning mode, the frequency changes one step at a time. In the quick tuning mode, you can quickly tune the desired frequency.

1.Press the [BND] button and select the desired band (FM or AM (MW/LW)).

•If “MANU” is not lit in the display, press and hold the [BND] button for 1 second or longer. “MANU” is lit in the display and manual tuning is now available.

2. Tune into a station.

zQuick tuning:

1.Move the [ ] / [ ] lever for 1 second or longer to tune in a station.

zStep tuning:

1.Move the [ ] / [ ] lever to manually tune in a station.

Recalling a preset station

Atotal of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exists to store individual radio stations in memory. Pressing the corresponding [DIRECT] button recalls the stored radio frequency automatically.

1.Press the [BND] button and select the desired band (FM or AM (MW/LW)).

2.Press the corresponding [DIRECT] button to recall the stored station.

•Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store that station into preset memory.

Manual memory

1.Select the desired station with seek tuning, manual tuning or preset tuning.

2.Press and hold one of the [DIRECT] buttons for 2 seconds or longer to store the current station into preset memory.

VXZ768R 19