Connecting the parking brake cord
Connect the cord to parking brake lamp ground in the meter panel.
Note:
•Connecting the parking brake cord to lamp ground allows you to watch iPod video/DVD video/AV input when the parking brake is engaged.
•When the parking brake cord is not connected, the monitor will not show any video sources.
•If “AUDIO ONLY” appears on the screen just after turning on the ACC power of the car, release the parking brake while confirming safety, and then engage the parking brake again.
Connecting the accessories
•Connecting to the external amplifier
The external amplifiers can be connected to the 6 channel RCA output connections. Ensure that the connectors are not grounded or shorted to prevent damage to the unit.
•Connecting to iPod device
The iPod device can be connected to dedicated iPod connection on the main unit. For detailed information, refer to the instruction sheet or manual for the iPod cable.
Note:
•This unit may not support all functions of all iPod devices
•The iPod connection will charge your iPod unless the iPod battery is completely depleted.
If the specified cord of the cellular phone is connected to the phone interrupt cord of the main unit, the audio mute is activated when cellular phone in use.
•Connecting to XM Satellite Radio Receiver
When a XM Satellite Radio Receiver is to be connected, use the dedicated connector. For detailed information,referto the instruction manual of the XM Satellite Radio Receiver.
English
VZ309 | 35 |
