Trouble Shooting
E
N G L
Static On Line
•Your phone may be located near a touch lamp, microwave, refrigerator or other household appliances.Try relocating your phone to another area.
•A cordless phone on your line may cause static.Try disconnecting the cordless phone.This may eliminate the problem.
•Extra devices attached to the tel- phone, such as cord detanglers, CID units and answering machines may cause static. Disconnecting the devices may eliminate the problem.
Person On The Other End Of The Telephone Cannot Hear You
•Speak directly into the handset trans- mitter in your normal tone of voice. Make sure the transmitter opening is clean and clear of obstructions.
There Is No Clock Display When The Telephone Is Hung Up
•Clock is set by the network when a CID call is received.The clock can not be reset manually. In event that the phone is unplugged or a power failure occurs, you must wait for an incoming CID call to reset the clock.
Interference
•Check cords and connections. Frayed or poorly connected cords can cause interference. Swap cords if necessary.
•A RFI (Radio Frequency Interference) filter can be placed on the line to help minimize or eliminate radio or CB transmissions.Try relocating the telephone to another area.
Compatibility
•The Clarity 510 is compatible with Digital PBX Systems. If a standard, single line phone works on the system, your Clarity 510 should also.
•The Clarity 510 is not compatible with key systems or AT & T PBX Systems.These units have a large electronic box controlling many phones as one unit.
I
S
H
27
