HANDSET SETTINGS
Set the Ringer Tone
1.Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2.Press <MENU/SELECT>, then <UP/DOWN> to select Ringer tone.
3.Press <MENU/SELECT>, then <UP/DOWN> to select the desired ringer tone (a total of 10 melodies for your selection) for setting ringer tone for external calls.
Note: The respective ringer tone will be played while browsing the tone list.
4.Press <MENU/SELECT> to confirm.
Set the Ringer Volume
1.Press <MENU/ SELECT>, then <UP/DOWN> to select Ringers.
2.Press<MENU/SELECT>, then <UP/DOWN> to select Ringer volume.
3.Press <MENU/SELECT>, then <UP/DOWN> to set the ringer volume (Off, Level 1 to Level 6).
Note: The respective ringer volume will be played during your selection. If OFF is selected, 
will display.
4.Press <MENU/SELECT> to confirm.
Set Key Tone
A single beep is emitted when you press a key. You can turn on or off the key tone.
1.Press <MENU / SELECT>, then <UP/DOWN> to select Settings.
2.Press <MENU / SELECT>, then <UP/DOWN>to select Key tone.
3.Press <MENU / SELECT>, then <UP/DOWN> to select On or Off.
4.Press <MENU/SELECT> to confirm.
BASE SETTINGS
Change the Dial Mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you should need to change this setting unless advised to do so.
1.Press <MENU/SELECT>, then <UP/DOWN> to select Settings.
2.Press <MENU/SELECT>, then <UP/DOWN> to select Dial Mode.
3.Press <MENU/SELECT>, then <UP/DOWN> to select Tone or Pulse.
4.Press <MENU/SELECT> to confirm.
Set the Home Area Code
If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as the home area code.When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number.
This feature makes it easy for you to place a call from the caller ID history. If you dial 10 digits to make a local telephone call, do not use this home area code feature. If you do, you will not be able to place calls from your caller ID history as they have only seven digits.
1.Press <MENU/SELECT>, then <UP/DOWN> to select Settings.
2.Press <MENU/SELECT>, then <UP/DOWN> to select Home area code.
3.Press <MENU/SELECT>, then enter the home area code. Only three digits in maximum can be entered.
4.Press <MENU/SELECT> to confirm.
Note: If, in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code + telephone number), you will need to delete your home area code.While the home area code is displaying in step 2 above, press and hold MUTE/X.The home area code is now restored to its default setting of _ _ _ (empty).
36 | 37 |
