Clarity XL-25S manual Setting up Your XL-25s

Setting up Your XL-25s

There are five steps involved in setting up your XL-25s.

1.Insert one 9 volt alkaline battery for extra bright ring flasher (optional)

Note: For your safety always unplug the phone line before you install or replace the backup battery.

2.Decide if you want the phone to sit on a desk or hang on the wall.

3.Connect the telephone components.

4.Program up to 12 telephone numbers to call with the press of a memory button.

5.Setup special features

Installing the Backup Batteries

To add extra brightness to the XL-25s’s ring flasher when you receive calls, install one 9 Volt alkaline battery (not included). Note: For your safety always unplug the phone line before you install or replace the backup battery.

Insert battery here

Press in here to open battery compart- ment

Figure 3

To install a new battery:

1.Slide open the battery compartment cover on the bottom of the telephone. (Figure 3).

2.Install one fresh 9-volt battery. The battery indicator on the base unit will light up if the battery is running low.

Setting the Dial Mode

Set the dial mode switch to T (tone) if you have touch tone service. Set the switch to P (pulse) if you have rotary dialing.

E

N G L I S H

7