MAINTENANCE
WARNING: Maintenance must be done by authorized personnel only.
CAUTION: Keep all adjustments according to specifications.
Maintenance Instructions
Return the machine to a Clarke Technology Authorized Service Location every 12 months for maintenance inspections.
Switches
WARNING: All electrical repairs must be done by authorized personnel only. The machine must be tested after electrical repairs to make sure it is safe to operate. Disconnect the electrical plug from the electrical outlet before doing any electrical repairs.
The start and stop switch has an interlock which pre- vents the contacts from being closed. If any part of the switch is not operating, replace the part. If any part of the electrical system of the machine is not operating or is damaged, replace the part. Make sure all connections are tight. Return the machine to the Clarke Technology Service Branch or a Clarke Technology Authorized Service Center for electrical repairs or testing.
Maintenance Of The Motor
Induction type motors do not require motor brushes.
If repairs to the gear unit or motor are needed, do not disassemble the gears and motor. Return the machine to the nearest Clarke Technology Service Branch or Clarke Technology Authorized Service Center.
For safe operation, and longer life to your Clarke Tech- nology product, use only Clarke Technology parts.
NOTE: The grease (503802) for the gear box needs to be changed every year. The
Page | CLARKE TECHNOLOGY Operator's Manual - C2K Series 120V |
