MAINTENANCE
WARNING: To prevent injury, always remove the electrical plug from the electrical outlet before doing any maintenance or repairs to the machine.
WARNING: Maintenance and repairs must be done by authorized personnel only. Use only genuine Clarke parts.
How To Change The Filter Bag
Themachineusesadisposablepaperfilterbag. Tochange the paper filter bag, follow this procedure:
1.Make sure the ON/OFF switch in the "O" position and that the machine is disconnected from the power supply.
2.Open the front of the canister housing. To open the canister housing, lift the release handle (see figure 17).
3.Grasp cardboard inlet on both sides of the bag (see points A and B on figure 19) and slightly rotate and pull bag out.
5.Install a new filter bag. To install a new filter bag, follow this procedure:
a.Unfold the filter bag.
b.Hold the bag by the cardboard inlet.
c.Place the bottom of the cardboard inlet into the slot under the bag adaptor (see figure 18, item A)
d.Put the opening of the cardboard inlet over the bag adapter (see figure 18, item B).
e.Make sure the cardboard is pushed all the way on the bag adapter (figure 19) or the door will not latch.
f.Close the canister housing.
Figure 17
B
A
Figure 18
AB
Figure 19
Clarke® Operator's Manual - D14 & D18 | 15 |