How To Change The Filter Cartridge
Change the filter cartridge whenever it is dirty or suction performance decreases. To change the filter cartridge, follow this procedure:
1.Make sure the ON/OFF switch is in the "O" position and the machine is disconnected from the power supply.
2.Open the canister door.
3.Remove the filter bag.
4.Remove the filter cartridge (see figure 20).
5.Replace filter cartridge and filter bag (see figure 21).
CAUTION: Check the filter cartridge while changing the paper bag. Replace the filter cartridge when dirty or when the vacuum suction performance drops off even with a clean filter bag.
How To Replace The Brush
WARNING: To prevent injury, unplug machine before cleaning or replacing brush. Brush may start suddenly and cause injury.
1.Put the machine on its side.
2.Turn the knobs which secure the nozzle plate. See figure 22.
3.Lift the nozzle plate up to remove it.
4.Lift the brush assembly up to remove it.
5.Install the new brush assembly.
6.Install the nozzle plate.
7.Put the machine on its wheels.
WARNING: To reduce the risk of injury from moving parts, unplug before servicing.
Figure 20
Figure 21
Figure 22
16 | Clarke® Operator's Manual - D14 & D18 |