EN
PROBLEM | CAUSE |
| ACTION |
|
|
| |
The cleaning is not even. | The scrub brush or pad is worn. | Replace the scrub brush or pad. | |
| There is damage to the brush assembly, | Have an authorized service person make | |
| caster or the solution valve. | the needed repairs. | |
| The brush motor is not running | Check for tripped breaker. Reset. Check | |
|
| ||
| The solution level is low. | for loose connections. | |
| Fill the solution tank. | ||
|
| ||
|
| NOTE: If the problem continues consult an | |
|
| authorized | service person. |
|
|
| |
The machine does not run. | The machine loses power. | Reset the circuit breaker. | |
| Key or switch is off. | Turn key or switch on. | |
| Batteries are disconnected. | Check the battery connections. | |
| Battery terminals are dirty. |
|
|
| Batteries are discharged | Check battery meter and recharge | |
|
| NOTE: If the problem continues consult an | |
|
| authorized | service person. |
|
|
|
|
Clarke® Operator's Manual | Page |