Classe Audio CA-3200 Specifications, Power output, both channels driven, Frequency response, Phase

Specifications

Classé Audio reserves the right to make improvements without notice.

■	Power output	200W/ch continuous rms @ 8Ω
	(both channels driven)	390W/ch continuous rms @ 4Ω
■	Frequency response		10Hz – 22kHz (+0/-0.1dB)
	Phase		10Hz – 155kHz (+0/-3.0dB)
■			better than -10° @ 22kHz
■	Signal-to-noise ratio			108dB
	Channel separation	(ref. full ouput, 10Hz – 80kHz)
■			better than 90dB @ 20kHz
■	Noise floor (FFT)		all peaks less than -95dBV
	Distortion (THD + noise)		(10Hz – 80kHz)
■			0.003% @ 8Ω
	(unweighted, 1.0Vrms/1kHz input, 10Hz – 500kHz)
■	Voltage gain			29.1dB
■	Sensitivity	1.4Vrms for rated output @ 8Ω
■	Input Impedance			100kΩ
■	Rated power consumption (as per IEC60065 para. 2.3.10)			672W
■	Idle power consumption			222W
■	Mains voltage		specified on rear panel
		(cannot be changed by dealer or user).
■	Dimensions (not incl. controls or connectors)		Width: 17.5” (445mm)
			Height: 8.75” (222mm)
	Shipping weight		Depth: 18.5” (470mm)
■			102 lbs (46kg)
■	Net weight			90 lbs (41kg)

For more information, see your Classé dealer, or contact:

Classé Audio

5070 François Cusson

Lachine, Quebec

Canada H8T 1B3

Telephone	+1 (514) 636-6384
FAX	+1 (514) 636-1428

http://www.classeaudio.com email: cservice@classeaudio.com

ENGLISH

Classé and the Classé logo are trademarks of Classé Audio Inc. of Lachine, Canada. All rights reserved.

i-Command™ is a trademark of Equity International, Inc. All rights reserved.

AMX® is a registered trademark of AMX Corporation of Richardson, TX. All rights reserved. Crestron™ is a trademark of Crestron Electronics, Inc. of Rockleigh, NJ. All rights reserved.

23