Classe Audio CA-5100 owner manual Danger, 7RS-232Control Port, 8AC Mains Input, 9AC Mains Fuse

Danger!

7RS-232 Control Port

This DB-9 connector has two purposes:

•downloading new operating software into your amplifier (should new features ever be added, for example)

•for external control of your amplifier by systems such as i-Command™, AMX® and Crestron™

For more information, please contact your dealer and ask about home automation systems.

8AC Mains Input

An IEC standard power cord is used with the CA-5100. Plug the cord into the IEC receptacle on the rear panel, and the other end into a suitable wall outlet.

9AC Mains Fuse

Your Classé power amplifier has an AC mains fuse, accessible on the rear panel. If you suspect that your AC fuse has blown, disconnect your amplifier from the AC mains, as well as from its input connections and speaker connections, and refer to the appropriate item of the section entitled Troubleshooting.

Do not open your amplifier. There are no user-serviceable parts within this product.

Potentially dangerous voltages and current capabilities exist within your power amplifier, even when disconnected from AC mains. Do not attempt to open any portion of the amplifier’s cabinet. There are no user-serviceable parts inside your power amplifier. All service of this product must be referred to a qualified Classé dealer or distributor.

16