Insert the linecord into the A.C. receptacle on the rear of the unit. PLEASE MAKE SURE
YOU HAVE PREVIOUSLY HOOKED UP THE SPEAKERS AND PREAMPLIFIER TO
YOUR AMPLIFIER BEFORE CONNECTING THE AC POWER CORD TO THE
AMPLIFIER.
CAUTION: SAFETY INSTRUCTIONS
DISCONNECT AC LINE CABLE WHILE MAKING ALL CONNECTIONS. "FLOATING THE
GROUND", OR DEFEATING THE GROUND ON A 3-PRONG LINECORD MAY CREATE
A SHOCK HAZARD. CONNECT ALL INTERCONNECT CABLES BETWEEN THE
ELECTRONICS BEFORE CONNECTING THE A.C. LINECORDS TO THE WALL
OUTLETS. THIS WILL REDUCE THE POTENTIAL SHOCK HAZARD.
Input and output connectors are clearly marked on the back of the amplifier. Use only high
quality interconnect and loudspeaker cables, and make all connections tight. If the RCA input plugs
are loose, remove them and pinch down the ground leaves slightly with pliers. Observe correct
phasing of the loudspeaker connections, and tighten.
Caution:1) Do not over tighten the output connectors as this can result to damage your
unit.
2) Do not use speaker system that has common ground with this amplifier.
IR OUT and IN
5