Clear2O CWS100A manual Getting Started, Installing the Filter

Product may vary slightly from what is illustrated.

c

b

a

1.Spout cover

2.Pitcher lid

3.Filter lid

4.Intelligent-filter indicator

5.Filter reservoir

6.Quick-connect hose

7.Faucet connector

8.Storage compartment

9.Pitcher (72 oz.)

†10. Filter (Part # CWF100)

11.O-ring seal

12.Bar

†13. Aerator (a) with faucet adapters (b) and 2 rubber washers (c) (Part # CWS100-02)

† Consumer replaceable/removable parts

GETTING STARTED

1.Hand-wash pitcher, lid and filter reservoir with a mild detergent and water. Do not use abrasive cleaners.

2.Rinse well.

Tip: Hand-wash pitcher, lid and filter reservoir periodically. Do not wash

in the dishwasher. For best results cleaning pitcher lid, dilute a teaspoon of vinegar in a cup of water. Soak a soft sponge in vinegar solution and wipe clean.

Installing the Filter

1.Wash your hands with soap and water then remove filter from packing film. Remove clear protective wrap from the filter.

2. Using your index finger, lift the filter lid to open (A).

A

3.Insert the filter into the filter reservoir by lining (up arrow) ▲ on the filter bar with (unlock symbol) on the lid (B).

B

4. Turn the bar clockwise to the (locked symbol) position. Be sure filter is locked in place (C).

Tip: The bar must be fully aligned with the (locked position) for the filter lid to close.

5. Close the filter lid.

C

3 4