Clear2O CWS100A manual Troubleshooting, Replacing The Filter, Pitcher, Care and Cleaning

Care and Cleaning

REPLACING THE FILTER

Filters are available at various retailers or by visiting our website at clear2o.com.

CLEANING

Pitcher

1.To remove the lid assembly:

a. Using your index finger, lift the filter lid to open.

For best results, the filter should be replaced after 40 gallons of consumed water. Unlike some other product filters that estimate filter life base on

time, the intelligent-filter indicator in your system measures the amount of water you use, resulting in a better value for your money--you will not replace the filter unless you really have exceeded the recommended filter capacity; therefore, it will last much

longer.

Intelligent-Filter Indicator

M

b.Grasp the top bar on the filter and pull it straight up to disengage the lid assembly from the pitcher (M).

Important: Be sure the filter is locked in place.

2.Empty pitcher and hand-wash with mild detergent and water. Do not wash in the dishwasher.

Your unit has an Intelligent-Filter Indicator built into the filter cover that automatically activates the flow meter indicator and resets it every time you install a new filter. This makes it easy to know exactly when to replace the filter (L).

•As soon as you install the filter, the indicator turns green for 30 gallons of water consumption then it changes to yellow for 10 more gallons of water.

•Once indicator turns red, it is time to replace the filter.

Lid and Filter Reservoir. Wipe lid and outside surface of filter reservoir with a damp cloth. Do not wash in the dishwasher.

GREEN

good for 30 gallons

L

1. To remove the filter:

YELLOW

good for 10 more gallons

L1

RED

It’s time to replace filter

L2

TROUBLESHOOTING

Filter lid does not close.	Make sure the filter is securely locked
	in place. Verify the bar on the filter is fully
	aligned with the	(locked symbol.
Not able to attach	Follow instructions for Attaching
connector to the faucet	Connector to Faucet.

a.Lift the filter lid to open.

b.Turn the bar on the filter counterclockwise to the (unlocked symbol) position.

c.Keep turning the bar until filter is released.

d.Pull out filter and discard.

2.To install the filter, follow steps 2-5 under "Installing the Filter".

Water leaks or sprays	Verify that you placed the washer
from connection at faucet	between the faucet and the adapter.
Cannot remove the filter	Turn filter bar pass the unlock position
	and keep turning until filter is released.

7 8