Ovation
User manual
1.Carefully install first the cables trough the smaller fitting in the mounting base until the position and cable cover (attached on the cable) fits in the cutout of the mounting base.
2.Then install the tonearm shaft trough the bigger fitting in the mounting base.
3.Now adjust the height of the tonearm.
4.Finally tighten the tonearm in the mounting base by screwing the integrated screw in the front of the mounting base.
5.For further settings of the tonearm and cartridge mounting please refer to the user manual of the respective manufacturer.
If you purchased your clearaudio Ovation turntable as a package with tonearm and cartridge, you will find a Smart Level Gauge in your accessory, which will help you to adjust the Tracking Force of the cartridge:
Diese Position der Nadel entspricht einer Auflagekraft von 20 mN (2,0g)
This position of the diamond
correlates to a tracking force of3 20 mN (2,0g)
Tracking force to high! /
Auflagekraft zu hoch!
Tracking force to low! /
Auflagekraft zu niedrig!
Pic. 10: Use of the Smart Level Gauge
Page 10 | clearaudio electronic GmbH 2012 |
