![](/images/new-backgrounds/1197300/1973009x1.webp)
6 |
| Getting Started |
|
Using your MAX EX conferencing phone
To make a call
1. Press the ON/OFF key. You will hear a dial tone.
Getting Started |
| 7 |
|
To access your service center
•While in Standby mode, press and hold the 0 key for 2 seconds. This feature must be programmed before use. See page 10.
2. Dial the number as you would on a standard phone. The number appears on the LCD
screen. | Figure 5. Dialing screen |
|
Note: You can also predial the number while in Standby (inactive) mode and press the ON/OFF key to connect the call. Press and hold the pound key (#) to enter a pause in the
dialing string.
To answer a call
• Press any key (except the star key (*),
MUTE, VOLUME UP. or VOLUME DOWN) on |
|
the keypad to answer the call. When there is |
|
an incoming call, the phone rings and the | Figure 6. Incoming call |
LEDs on the phone and the phone icon on |
|
To store a number in the phonebook
1.Enter the phone number you want to store while conferencing pod is in Standby mode.
2.Press and hold the PHONEBOOK/EDIT key until the Phonebook and Program icons appear on the LCD screen.
3.Assign a Phonebook location
4.Press PHONEBOOK again to save the entry. You will hear a confirmation tone.
5.To exit Phonebook Edit mode before saving the entry, press CLEAR.
Figure 7. Adding Phonebook entries Phonebook and Program icons
the LCD screen flash. |
To end a call
•Press the ON/OFF key. This will disconnect the call and return the phone to Standby mode.
To redial a number
1.Press the ON/OFF key. You will hear a dial tone.
2.Press REDIAL to dial the last number called.
Note: You can also press REDIAL while in Standby mode to display the last number called. To connect the call, press the ON/OFF key.
To adjust ringer volume
•While the phone is ringing, press VOLUME UP or VOLUME DOWN.
•While the phone is inactive, press VOLUME UP or VOLUME DOWN. The ringer melody will play once at the new level.
To mute the call
•While on a call, press MUTE to mute the microphones (loudspeakers are not muted).
•Press again to unmute.
To access your speed dial number
•Press the SPEED DIAL key. This feature must be programmed before use. See page 10.
Note: You can easily add the last number you dialed to the Phonebook. Simply press REDIAL to display the phone number and follow steps
To make a call using the Phonebook
1.Press PHONEBOOK.
2.Press the number key
3.Press ON/OFF to dial the number.
Note: You can also press the ON/OFF button to get a dial tone before entering the Phonebook.This will cause the number to dial as soon as you select the speed dial location.
Technical Services Group ~ | Technical Services Group ~ |