5.After resetting, the handset will return to standby mode.
█Base Selection
This function allows you to select a base from those already registered to the handset.
1.Press the Menu soft key to display the main menu list.
2.Press up
or down
to scroll to HS Settings and then press the Select soft key.
3.Press up
or down
to scroll to Select Base and then press the Select soft key.
4.Press up
or down
to select the base you want and then press the Select soft key. If you select a non- existent base, the handset will sound a warning tone.
5.The display will show Selected BS_X_ (Base
█Out of Range Alarm
This function allows you to know when the handset is out of range of the base, and a beep will sound. Your ClearSounds® A300E comes from the factory preset for Out of Range Alarm ON. To change this setting:
1.Press the Menu soft key to display the main menu list.
2.Press up
or down
to scroll to HS Settings and then press the Select soft key.
3.Press up
or down
to scroll to Tone Setup and then press the Select soft key.
4.Press down
to select Range Alarm and then press the Select soft key.
5.Press up
or down
to select On or Off and then press the Save soft key.
