C.SPECIAL INSTRUCTIONS FOR CASTER EQUIPPED COMBI STANDS AND COMBIS
1.Read all instructions before beginning installation.
2.Level the floor if needed.
3.NOTE: Combis on
4.The front wheels of
5.Follow the separate instructions included with the Stand, Stacking Kit, or Caster Kit.
6.Make sure the Stand, Stacking Kit, or Caster Kit matches the Combi(s).
7.Use only genuine Cleveland Range Stands, Stacking Kits, Caster Kits, and replacement parts.
8.Use of Stands, Stacking Kits, Caster Kits, and replacement parts other than genuine Cleveland Range Stands, Stacking Kits, and Caster Kits and replacement parts can result in injury and / or catastrophic equipment failure, and voids the Warranty.
9.The appliance must be secured to building structure, to prevent any strain on the utility connections, and to help reduce the risk of electric shock.
10.The strain relief (restraining device) must be installed to limit the movement of the appliance without depending on the connector and the
11.Connect the strain relief (restraining device) BEFORE starting the Combi
12.If the strain relief (restraining device) must be disconnected, it must be reconnected after the Combi has been returned to its originally installed position BEFORE restarting the Combi.
13.Prepare the installation location as described in the Combi Installation Manual.
14.For GAS (OGB, OGS) Combis: The installation of the gas supply shall be made with a connector that complies with the Standard for Connectors for Movable Gas Appliances, ANSI Z21.69 / CSA 6.16, and a quick disconnect device that complies with the Standard for Quick Disconnect Devices for Use With Gas Fuel, ANSI Z21.41 / CSA 6.9.
15.The appliance shall be installed using flexible conduit.
16.Mechanically secure the flexible conduit to the Combi’s electrical access hole.
6
