Chipset and Mainboard information

PC Card Chipset - PCI1410

The PCI1410 supports the following features:

Ability to wake from D3 hot and D3 cold

Fully compatible with the Intel 430TX (Mobile Triton II) chipset

A 144-Pin Low-Profile QFP (PGE), 144-ball MicroStar Ball Grid Array (GGU) package, or 209-ball MicroStar Ball Grid Array (GHK) package

3.3-V core logic with universal PCI interfaces compatible with 3.3-V and 5-V PCI signaling environments

Mix-and-match 5-V/3.3-V 16-bit PC Cards and 3.3-V CardBus Cards

Single PC Card or CardBus slot with hot insertion and removal

Burst transfers to maximize data throughput on the PCI bus and the CardBus bus

Parallel PCI interrupts, parallel ISA IRQ and parallel PCI interrupts, serial ISA IRQ with parallel PCI interrupts, and serial ISA IRQ and PCI interrupts

Serial EEPROM interface for loading subsystem ID and subsystem vendor ID

Pipelined architecture allows greater than 130M bps sustained throughput from CardBus-to- PCI and from PCI-to-CardBus

Interface to parallel single-slot PC Card power interface switches like the TI TPS2211

Up to five general-purpose I/Os

Programmable output select for CLKRUN

Five PCI memory windows and two I/O windows available to the 16-bit PC Card socket

Two I/O windows and two memory windows available to the CardBus socket

Exchangeable Card Architecture (ExCA) compatible registers are mapped in memory and I/ O space

Intel 82365SL-DF and 82365SL register compatible

Distributed DMA (DDMA) and PC/PCI DMA

2 - 11