DIGITAL VIDEO RECORDER MANUAL
Warning
Check if the power is switched off before installation. | Check if the power is switched off before installation |
Don’t plug in at the same time. Otherwise it may be | or additional repair. Never plug in while the device is |
set on fire or put you at the risk of electrocution or | in operation. Otherwise it might be set on fire or put |
damage. | you at the risk of fire, electrocution and damage. |
|
|
Keep the cables at least 15 centimeters away from | Never uplift the cover, break down, repair and |
the wall and at least five centimeters away from the | maintain at your disposal. Otherwise it might put |
side so that the cables, including power line and | you at the risk of fire, electrocution and damage. |
video cable, may not be disfigured. Otherwise it | . |
might put you at the risk of fire, electrocution and |
|
damage. |
|
|
|
Keep the device environment always clean before | Input voltage of the device should come within the |
and after installation of the device. Use dry cloth to | range of 10 percent of specified voltage. Use |
clean the device. Never use any organic solvent. | separate wall power to keep heating appliances, |
Otherwise it might be the cause of electrocution or | including hair dryer, iron and refrigerator. Otherwise |
mechanic disorder. | it might be the cause of fire and electrocution. |
|
|
When strange noise or smell is sensed, immediately | Do not install device in humid place filled with dust. |
plug out and send inquiry to service center or seller. | It might be the cause of electrocution and fire. |
|
|
DIGITAL VIDEO RECODER MANUAL
3
