![](/images/new-backgrounds/1118902/11890291x1.webp)
System Instruction Manual
▫Channel Selection and Screen Conversion
To change a channel, press the CHANNEL button on the remote controller or click the CHANNEL button on the
(EXIT) button.
▫ZOOM / FOCUS
Control the ZOOM and FOCUS of PAN/TILT camera.
Click the ZOOM/FOCUS button on the PAN/TILT CONTROL window
▫ Button of PAN/TILT Control window ![](/images/new-backgrounds/1118902/11890291xi3.webp)
Move the PAN/TILT window as shown in
▫PAN / TILT
Control the PAN and TILT of PAN/TILT camera.
Click the PAN/TILT Button on the PAN/TILT CONTROL window
▫PRESET
[Fig.6-15-1 Preset Menu]
It is a function to preset the PTZ camera(s) which you wish to monitor frequently.
Preset Setup
-Select a position of camera you wish to preset and click the SET button in
-Click the number(s) for the current position of camera.
-To delete the numbers by using ← button.
Preset Execution
Click the number(s) which you preset and click GO button to move the camera.
*If you preset the number again, the previous setup is not available and only current setup is available.
46