Clover Electronics LCD2288DVR, TFT2284C, TFT2288C Copying the recorded data during replaying

6. How to Operate

6-10.4. Copying the recorded data during replaying

The system allows users to copy the recorded data during replaying.

▫Start replaying (See section 6-9).

▫Right-click on the replaying screen, and then the COPY DATA screen will be displayed (See Fig.6-43).

▫To set the starting time and date to copy, select the values (year/month/date window and hour/minute/second) on the COPY DATA window by clicking the mouse, change the values with the mouse’s wheel and click the mouse again on the changed values to complete.

▫Select each of channels (1 through 8 in red) or “A” in black for all the channels on the COPY DATA window, and then click on the SELECTED button to save.

[Fig.6-43 Start Copy Time Setup window]

▫To set the ending time and date to copy, right-click on the replaying screen again, and the COPY DATA window that contains end time for copying will be displayed (See Fig.6-44). Set the ending time and date to copy as described above.

▫To select the COPY MODE, click on the GO TO COPY button (See Fig.6-44), and then the COPY window (See Fig.6-38) will be displayed. The time and date (starting time and ending time) to copy can be changed on the COPY window as well (See section 6-10.2).

67