9034-SD Owner’s Manual •
••
• (V 2.0) Page 21 of 28
Menu Item Format Description
Composite
Y/C
YPbPr BetaCam
YPbPr MII
SD Input Type
YPbPr SMPTE
Selects the format of
input SD analog video, so
the decoder can properly
decode the signal.
Video Signal Controls
SD Composite
Contains 0.0 or 7.5 IRE of Setup
Specifies the amount of
setup (pedestal) in the
input video. It will be
removed by the decoder.
Menu Item Format Description
On
AES Pair 1-8 SRC
Bypass
Off
This will bypass sample
rate conversion on AES.
If bypassed AES rate
must match input video
rate or audio dropout will
occur. SRC must be
bypassed to embed Dolby
encoded audio.
On
AES Pair 1-8
Passthrough Off
AES output pair X will
be a low latency copy of
AES input pair X.
On
AES Input Controls
AES Pair 1-8
Zero Delay Off
Embeds with low (<1 ms)
latency. Overrides routing
choices.
Menu Item Format Description
Video Gain Range 0-2000 Gain applied to Y (Luma).
1000 is unity.
Video Lift Range (-999) – 999 Lift applied to Y (Luma),
in 10 bit code value.
Color Gain Range 0-2000 Gain applied to C
(Chroma). 1000 is unity.
Color Phase Range (–360) – 360 Phase of C (Chroma) in
degrees.
Video Proc
Reset to Unity Confirm Resets all of the proc
controls to unity.